Handle control mode for tripod use:

Install a three-channel lens control handle at the end of the tripod handle. This is used for conventional tripod shooting, or for the VR production when use on a tracking tripod with its high-precision lens data.

Setup the motors:

(1) Set the motor's corresponding lens function, such as zoom, focus, and aperture, through the DIP switch on the front of the focus follower.

     Note: It is necessary to carefully check the menu on the back of the motor for DIP switch settings.

(2) Install the corresponding lens function motor on the 15mm rod, connect it to the lens ring gear, and lock it.

(3) Select a single-channel, dual-channel, or three-channel lens motors according to the lens function to be controlled and connect them in series.

     Note: It can be connected from either interface 1 or 2, and the other interface is looped out.

(4) After power-on, the motors automatically searches for the focal length range. The focal length range can also be set manually through the remote control panel or by using the two   forward and reverse buttons on the focus follower to set the lens range.

     Note: Whenever power on, the setting of the lens range is required.

AI Production

Tech Specs